Instruction
1
In the cartridges the printer has a chip, which contains information on the resource and on the number of already printed pages. When the cartridge indicates the need for its replacement, not necessarily that it is really empty, just the chip counted the number of pages needed. And the pages could be printed only a few lines. That is, the ink level in the cartridge is calculated by the program, and there is no information about the real situation. To solve this problem in several ways. To laser printerx, it is possible to replace the chip on the cartridge. There are chips for large quantity laser printers, there are universal chips that are suitable for a wide variety of printer models. In inkjet printerthis chip is fundamentally different and just replace it. In this case, you can hold the reset chip cartridges. The most simple solution is to carry out zeroing using a special programmers or reprogrammation. They are on sale or you can make them yourself. For self-reset chips, remove the cartridges from the printer.
2
In the service menu of the printer press the cancel button and press OK. After some time, release the buttons.
3
In the menu, select the Resets Menu, and then click OK.
4
Select Reset Partial and then again click OK. Then the printer is off.
5
Turn on the printer, select region and language to Europe.
6
After that follow the instructions will offer you the printer. Check what is the ink level. If he wasn't 100%, then repeat the steps again, but instead select Partial Reset Semi Full Reset. In some cases after that, you must repeat all the steps again, but with a Partial Reset.
7
Also try to click on the button "Reset/Stop" on the printer about 10 seconds. After that, the ink cartridge will no longer be tracked by the printer. For each color need to separately. Now the ink level need to monitor yourself visually.
