You will need
- - high-quality cotton or cotton in the amount of half a meter (with a width of 150 cm) or one meter (80 cm wide);
- - sewing supplies.
If you can't draw a pattern yourself, you can use any commercial pattern shorts with classic style. Importantly, just remove the measurements and, if necessary, adjust the pattern at the desired size.
Fold in half the fabric and put the pattern, fixed with needles or special weights. If you do not want to do the side seam on the pants, align the halves of the side sections. Eroded chalk circle pattern on the edges, and then draw a second time with consideration of the seam. After cutting you should get two symmetrical halves (left and right leg).
Flatlock detail pant perform a lapped seam. Start process step weld, one that is located on the inner thighs. To do this, fold the inside face of one part of the leg (right or left) combining two of the slice (step) of the part. Release 6-8 mm slice layer the bottom and begin to scribble around the edge of the top layer of calico on the width of 5 mm (width-legs).
Now lay the part on the plane in one layer and go around the lower protruding section of the upper cut. Topstitch it from the bend at a distance of 2 mm. Lapped seam is easy to perform. However, before you start grinding parts of cowards, practice on the fabric that the seam was smooth and did not require alteration.
Treating this seam of the two halves, you get two separate pant legs. They are connected at the seam. Remove one of the leg facing outwards and put it in the second leg, precisely aligning all the slices. Middle seam, it is also desirable to perform a lapped seam.
Hemming the top and bottom underpants Poggibonsi seam having a closed cut. The upper section must be processed so as to leave holes for threading the elastic. This way you can make not only cowards, but regular shorts, providing additional pockets and inserting a wider band.