How to make a hole in the belt

Each strap has numerous holes so that any person could adjust its length to fit your own waist. But sometimes you have to do extra holes in the strapthat will be useful when you lost or too recovered. This saves money on buying a new belt and leaves you in the company of your favorite things.

You will need

• Pen, wooden Board, hammer, nail, rivet, knife, Shoe, toothpick.

Instruction

1. Attach the belt to the waist and define the place on it where necessary to make a hole. Mark this area with a pen, making a small point parallel to and at equal distance from the other holes in the strap.
2. Put the belt on a wooden Board outer side up. Put to the designated place the nail and hold it with two fingers perpendicular to the Board head up.
3. Gently tap the nail with a hammer, reinforcing each successive blow, until the leg of the nail completely penetrate the belt. Remove the nail from the hole.
4. If a leather belt – hole ready. If the belt is made of a different material and all the holes in it are processed with rivets, and have this new opening is also decorate with rivet. Use a sharp knife and a hammer to smooth the edges of the rivet.
5. Leather belt (no studs) in a new puncture site should be treated with a colorless Shoe Polish. Use a toothpick or cotton swab to drop into the hole in the Shoe. This will reinforce the edges of the hole.