You will need
- - screwdriver,
- - a metal plate with a width of 2 cm and a thickness of 3 mm.
Instruction
1
To complete the painting of the mirrors, they must first disassemble. To achieve the tasks required: from inside the vehicle to move the mirror down as much as possible.
2
As a result, in the upper part of the mirror forms a crack in which to insert the wide, flat, no thicker than three millimeters, the plate of metal. When a sharp tap from itself, removed the mirror element.
3
In the next stage with a screwdriver removed a decorative plate made of plastic, located on the inner surface of the door. Removing it, unscrewed the three bolts attaching the mirror housing for rear view on car door.
4
Dismantle the housing, inside it are exempt from attachment and retrieves all the details of the design: the mechanism of the angle of inclination of the reflecting element, the spring and the mounting bracket of the mirror insert.
Note
During the dismantling of the glass, the reflecting element (mirror), it is necessary to observe safety measures when working with glass. That will help avoid cuts on the body.